ChemScan mini Cu (Copper Analyzer)
|
ChemScan mini Cu Documents
| ||||||||||||||
This highly reliable, easy to use online colorimetric water analyzer family provides accurate analysis, real-time data and continuous monitoring for municipal drinking water and wastewater applications. The ChemScan mini analyzer handles a single sample line and is available in a wide array of parameters and measurement ranges. Its industrial design, with sample tubing (ID) that is approximately 2X larger than competitive systems, minimizes the chance of plugging for exceptional reliability and lower maintenance. Its reliability combined with affordable reagents and spare parts results in a very low cost of ownership. In addition, ChemScan mini analyzers are so easy to start-up and maintain that service maintenance contracts are not necessary.
|
Benefits
Applications
Features
Capabilities
Parameter
|
Specifications: Range: 0.02 - 6.0 mg/L (Method 1065) 0.001 - 2.00 mg/L (Method 1056) 0.05 - 6.0 mg/L (Method 1027) Accuracy: 2% of value or 2x detection limit (whichever greater) Cycle Time: 4 min. (1027) 5 min. (1065) 4 min. (1056) to 9999 minutes (field programmable) Environment: 5 - 50 degrees C (method dependent) Power: 100 - 240 VAC, 50 W Enclosure: NEMA 4x Safety Approval: CSA-US Sample Requirements: 0.5 - 1 Liter/analysis, pressure 2 to 10 psi, <150 mg/L TSS, <60 NTU Maintenance: Reagent replacement every 3 months, pump kit yearly Relay Contacts: 1 SPDT Concentration, 1 SPDT Programmable Serial Interface: RS-232 Maintenance Port Analog Output: Isolated 4-20 mA |